Now that I have everything in place it's all good except when the car is idling the idle is kind of lumpy. It sounds like it has a performance cam but I'm 100% positive it does not. When I rev it up it sounds just fine until it returns to idle.
When I pulled connector to the MAF it idles nice and smooth and revs nice but it throw a CEL. When I plug it back in it starts the lumpy idle BS again. I tested with another known good non-vanos MAF and got the same results so now I know it's not the MAF either.
Is there anything else that might cause a M50 to idle like this?
When I pulled connector to the MAF it idles nice and smooth and revs nice but it throw a CEL. When I plug it back in it starts the lumpy idle BS again. I tested with another known good non-vanos MAF and got the same results so now I know it's not the MAF either.
Is there anything else that might cause a M50 to idle like this?
Comment