o2 bracket where does it go?

[Mako18]

I have a m50b25tu e34 engine harness with a O2 sensor plug that has a bracket. I can't seem to find any pics of this bracket on realoem or on build threads. Does anyone know where this mounts? I have tried several places on the engine, engine mounts, intake manifold supports & none of which seem good enough. I know it has its own place and its driving me nuts. The O2 plug wire and bracket come out in the same spot as the two small starter grounds. I can snap a pic when I get my camera back in the meen time I did my best descriding its location on the harness.

thanks
-D

[jahnaboi]

Describe this bracket? Or better yet snap some pictures. If I'm guessing its the long ass o2 sensor wire (4 prong round connector) I believe its suppose to wrap onto the tranny (up and over) and end up on the passenger side where the o2 bung would be... I don't know if I helped any, need pictures to know what you're exactly trying to describe.

[Mako18]

yeah I would post a pic but my girl has my camera. Its a very odd looking bracket kinda difficult to describe. I just found the bracket on realoem. Its number 15 "the lamba probe bracket". hope this helped some.


http://www.realoem.com/bmw/showparts...80&hg=12&fg=31

[Mako18]

This wire isn't all that long maybe 10"-14" I know its for the O2. I did find a pic of it my e36 Haynes manual and it looks to be mounted on the engine mount arm but the pic is crappy and I can't see where it would mount exactly there is nothing around it to reference since the pic is so close up to the plug.

[Mako18]

anyone?