Completed S38 Swap Roll Call

[downforce22]

Here are a couple. It is currently under an engine rebuild at the moment.

[Tinkerer007]

Throw me on the list, I found a diamond in the rough this weekend on craigslist. I'll post pictures soon.

Please post some pictures...

[downforce22]

What??? how did I miss one.

I called the guy 15 minutes after it was listed and he deleted the ad the same day. ;D

[Roland H]

Throw me on the list, I found a diamond in the rough this weekend on craigslist. I'll post pictures soon.

What??? how did I miss one.

[downforce22]

Throw me on the list, I found a diamond in the rough this weekend on craigslist. I'll post pictures soon.

[tonton]

Got finished swap, 700 km now on the road, it runs nicely
Check out new pics in my topic

[henryki]

all of those swaps. they are so beautiful. I think I'm gonna cry

[rawmotorsportrob]

right i have a E24 M6 engine hear then.
thats the sump it is on and its so far fowered the rack sits behind the center bowl !!

Its so bad really.
thanks for that. It looks like an E34 535I (m30) sump will work. Have to get one and see.

Thanks

[Xat1cZ]

B38 and B36 sumps should probably bolt up, don't know what modifications would be needed tho', if you look at the diagrams.



http://www.realoem.com/bmw/showparts...93&hg=11&fg=10


http://www.realoem.com/bmw/showparts...38&hg=11&fg=10

[rawmotorsportrob]

Any help please .
Hi all, this is my first post on hear and im sorry if this has been covered in the past.

I need to no what sump will work on a M88 to fit it in an E30. (the M88 one has the bowl in the middle)

We have been given an E30 that already has the M88 in it but it is fitted very badly ,So bad the front pully is out the front of the car as the engine is so far to the front!! Its shocking.
I have been asked to fit it to an E30 M3 but i need it to look like it should be there so i need a front sump as a starting point.

thanks . Robin RAW motorsport

[Alpina]

did any of you guys use the M20 or S38 wiring harness for your conversion?

Yes,,,,,, I had it done like i changed the M20/E30 for S38B38/E30

so the engine ,,S38B38 is an oem wiring ,, and the car was modified to talk to S38b38

a friend of mine followed the instruction on e30.de

,, an option you should consider

DO NOT CHANGE ANYTHING on the car or engine,, then both car and engine can be converted back.. if something happens etc etc

do an adapter conversion

[ja burna]

did any of you guys use the M20 or S38 wiring harness for your conversion?

[Sharino]

Guess I can finally join this thread! Completed a 89 M-technic II automatic to S38B36 5spd swap.

[tonton]

http://www.r3vlimited.com/board/showthread.php?t=102768

[Bimmer_man]

Cool, never noticed the S38 section here.

Here is an early picture of mine. I will take some current pictures one of these days.

Looks good can't wait to see some updated pics.