Mtech 1 Spoiler delimma HELP

[thereisnoyun]

well its not really a delimma, just wondering what other people have done in the past and what worked, not trying to reinvent the wheel here.

So the studs that mount the insert piece is off. for those who had these, it has a threaded holder that is fiberglass into the insert and the bolt, bolts on from the actual spoiler underside. Now since the holder is out because its a littel rusted and cracked, I pull all of them out. I'm wondering

should I just put a stud back in there, and use nuts and bolts on teh underside, like how is spoiler is mounted to the trunk, or should I find a holder to fiberglass back in so I can bolt it underneath. It would seem the stud idea is better. but I dont know.

Anyone one done this before that wants to give me some advice?

[Wishno87]

Two of mine were missing so i just put studs in them and fiberglassed over them. Worked pretty well.

[thereisnoyun]

Two of mine were missing so i just put studs in them and fiberglassed over them. Worked pretty well.

you put in studs and use nut and washer on the other end? or you use fiberglass the nut inside? and use the original hex bolt?

[Wishno87]

I put a stud in the fiberglass part and used a washer and nut on the other side. You just have to be careful that the stud is at the right angle and not too long that it will mar the paint on the trunk.