There seems to be very little information about the Tow Hook Extender that goes along with the M-tech 1 front spoiler. So now that I've figured it all out, I want to share how it works because I know there are M-tech 1 owners out there wanting to know about it.
With every M-tech kit came tow hook extenders for the rear and front. They are separate part numbers. Many times you will see them painted body color, or flat black. Both look good, but from factory they were gold irridite. Here's how you instal it if you have an m-tech kit.
Here's what you start with, your standard tow hook with M-tech 1 front spoiler.
You need to take the bumper/spoiler off
Then you can get at the tow hook in its entirety
You will see the bottom half of the extender cuffs into place under the tow hook
Put in your bolt, washers, and nut and tighten it up tightly
Reinstall the bumper/spoiler and you'll have this
There you go! All finished and ready to look-good/tow. :)
With every M-tech kit came tow hook extenders for the rear and front. They are separate part numbers. Many times you will see them painted body color, or flat black. Both look good, but from factory they were gold irridite. Here's how you instal it if you have an m-tech kit.
Here's what you start with, your standard tow hook with M-tech 1 front spoiler.
You need to take the bumper/spoiler off
Then you can get at the tow hook in its entirety
You will see the bottom half of the extender cuffs into place under the tow hook
Put in your bolt, washers, and nut and tighten it up tightly
Reinstall the bumper/spoiler and you'll have this
There you go! All finished and ready to look-good/tow. :)
[/url]
Comment