325is front valence air dam

[bertomanfred]

i have a question about mounting the is air dam. Do you remove diving board bumper and install air dam then put bumper back and how you you have enough space to bolt up bumper? it seems like car must be on lift to do so... any tips and tricks>?

[ELVA164]

You need the older valance to attach it properly.

[Amotacos]

Help

I know this is an old thread but any help would be appreciated, I just purchased an 88 sedan super eta which has a diving board and a newer valance. Is there anyway to get a cow catcher on my sedan?

[ELVA164]

I have the side bracket but cannot get it to connect to the air dam at all, any ideas???? It falls off after jb welding and after double sided tape. I really don't want to drill it.

Do you mean the metal bracket that always seems to be missing? If so, could you PM me the dimensions of it so I can make a pair? To answer your question, I was thinking of trying plastic&emblem cement to attach mine once I made them.

[bigdrick323]

I have the side bracket but cannot get it to connect to the air dam at all, any ideas???? It falls off after jb welding and after double sided tape. I really don't want to drill it.

[Chuckcruzin1986]

Price of brackets

I'm also interested in a set. What will be the price and when will the next Bach be done and ready to ship?

$149 on ebay and $135 plus $5 shipping if ordered direct.
Thanks
Chuck

[Chuckcruzin1986]

Perfect replacement

So are you making replacement ones, so there is the right left and center, or will they be universal?

-Thanks

These brackets are a perfect replacement and yes, they are left, center and right. You can see how they are marked. Note the arc which gives a little spring effect which will minimize the chances of breakage.

We are sold out now since I only made 3 sets to start with (just incase I had made a design mistake). It looks like another 2 weeks (around the end of July).

Chuck

[bubbajan21]

I'm also interested in a set. What will be the price and when will the next Bach be done and ready to ship?

[Kommando]

Nice Chuck, very subtle.

I would be interested in a set when you get the next batch done, what are you charging for them?

I also like your chock block in the third picture.

-Thanks

[Chuckcruzin1986]

Finished but we are sold out

So are you making replacement ones, so there is the right left and center, or will they be universal?

-Thanks

We only made 3 sets to start with just in case there was an error. One set for me and the other 2 are sold. We are building 15 more sets now. See the image of the final product.

There is left, center and right units :) (see how they are marked)

Regards,
Chuck

[Chuckcruzin1986]

So are you making replacement ones, so there is the right left and center, or will they be universal?

-Thanks

[Chuckcruzin1986]

See post below

It's been 2 weeks. Are you selling the brackets yet? If so, how much for a set?

[Kommando]

So are you making replacement ones, so there is the right left and center, or will they be universal?

-Thanks

[bubbajan21]

It's been 2 weeks. Are you selling the brackets yet? If so, how much for a set?

[Chuckcruzin1986]

They are in production

Hey Chuck, if you end up making some of these in the near future I may be interested in picking up a set

They are in production with improvements over the ones in the picture.

I have added a spring shape instead of the break away thin section.

They will be ready to ship in 2 weeks

Chuck