Any rear apron/valence fit the early model?

[bigredguy]

I have an early model 325 4 door, and i really dont like how there is no apron. It makes the car look like its missing a piece. Are there any that can bolt right up? Ive searced all over r3v and the internet and cant seem to find any information. Thanks

[howelll]

racing dynamics if you can find one. Also m tech 2.

[bigredguy]

they will both bolt straight up to a diving board car with no modification right? Any other suggestions anyone?

[Mike30e]

Most common were the Zender and the Kamei units, they come up for sale from time to time on the forum boards. Straight bolt on, no modifications.

[e30slidewayz]

I have a racing dynamics rear apron for an early model. It's in great condition, PM me if interested.

[Varinn]

You should PM that guy ^^^

i have a racing dynamics rear skirt I hope to install on my DB car soon, I think they look great. Here's a pic I found on google for reference

[bmwstudent]

i just bought a racing dynamics rear valance, and i can't wait to put it on. I put it in place with a couple clamps to see if i like it. I DO, it makes the car look so much better. i also bought a zender trunk lid spoiler from the same guy.

[devon.818]

a stock one works. just cut off a late model apron and fasten it on. JBweld, bolts, and some weather epoxy.

[bigredguy]

they do look good. My plastics are still black and i like them that way so i would have to decide to paint the apron flat black like the plastics, or go burgundy like my car. Any opinions?

[rndmind14]

m tech 2 rear apron bolts straight on?? I've only seen an m tech 2 on the front (which in my opinion actually looks good on the DBs) but never the rear...

[CW325]

not mine: mtech 2 rear valence with dbs

[bigredguy]

will rear plastics from a late model bolt straight on to our DB cars? I like them the most, and it seems like they would be easier to get ahold of than some of these other ones.

[einstein57]

No. There are several right ups on how to do the modifications though. There is actually one on the main page.

http://www.r3vlimited.com/tech/bumper/bumper1.htm

[M-technik-3]

That RD car is a forum members and it is now a Tech I car.

http://www.strictlyeta.net/

I have one but at the moment would rather not sell it. I had consider selling the front and rear as a package deal.

[bubbajan21]

a stock one works. just cut off a late model apron and fasten it on. JBweld, bolts, and some weather epoxy.

Do you have any pictures of this or have you done this? I think that would look best as I honestly haven't seen a rear valance that I really love.