Hello R3V Community,
Putting out a feeler here for media blasting. Just curious to see if there is any interest on r3v. I can sandblast anything from a rusty belt pulley to a complete subframe. On all metal surfaces and materials. Glass bead, black beauty is what will be typically used for media. Occasionally I will use walnut shells on delicate pieces, mostly engine internals.
Bolts/nuts/hardware, valve cover gaskets, oil pans, subframes, springs, dissassbled struts, any suspension pieces, brackets, chrome trim. Ill even blast your welds and treat them with rust inhibitors. Whole body panels or even cars can be done if you are within a reasonable distance. Literally anything, does not have to be car/auto related.
Sandblasting is the best possible way to prep anything for paint or plating!
When I say we can blast anything, I mean anything. PM me if there are any questions you may have, or if you would like to see pictures of my work. I may eventually start offering powder coats, but only if there is interest of course.
ALL JOBS- will be negotiated in agreement with the purchaser of said services before project start or shipment of good/services. Buyer pays shipping unless otherwise discussed.
Unlike others. We will always give you the results you deserve to see in professional media blasting. Jonathan, For email inquiries: rjjasse@comcast.net
Thank you
Putting out a feeler here for media blasting. Just curious to see if there is any interest on r3v. I can sandblast anything from a rusty belt pulley to a complete subframe. On all metal surfaces and materials. Glass bead, black beauty is what will be typically used for media. Occasionally I will use walnut shells on delicate pieces, mostly engine internals.
Bolts/nuts/hardware, valve cover gaskets, oil pans, subframes, springs, dissassbled struts, any suspension pieces, brackets, chrome trim. Ill even blast your welds and treat them with rust inhibitors. Whole body panels or even cars can be done if you are within a reasonable distance. Literally anything, does not have to be car/auto related.
Sandblasting is the best possible way to prep anything for paint or plating!
When I say we can blast anything, I mean anything. PM me if there are any questions you may have, or if you would like to see pictures of my work. I may eventually start offering powder coats, but only if there is interest of course.
ALL JOBS- will be negotiated in agreement with the purchaser of said services before project start or shipment of good/services. Buyer pays shipping unless otherwise discussed.
Unlike others. We will always give you the results you deserve to see in professional media blasting. Jonathan, For email inquiries: rjjasse@comcast.net
Thank you
Comment