Mounting Euro Plate Filler - DIY? Walkthrough?
Collapse
X
-
On my car [and trailer] I drilled out all four holes in the filler and removed the stock white plastic things. The plate and filler are bolted top and bottom with stainless steel bolts and lock nuts. Probably a bit excessive. :)Leave a comment:
-
You will only use the top two mounting mounting holes and you will have to drill the plate filler. It will have an overhang.Leave a comment:
-
Thanks to rwdrift
Take out the stock white plastic bolt thingy's, line up euro plate filler. From inside the trunk, get a marker and draw holes on the back of the plate filler through the holes for the little white tabs you removed.
Drill filler.
Use nuts or some sort of rubber that'll hold the screws, tag and eventually the filler
You got yourself an euro plate filler now
I am going to do this and spray some undercoating on the isnide so no rust :)
doesn't really answer my question.Leave a comment:
-
-
I just drilled 4 7/8in holes in the filler where the white things are and slipped the filler in place and then put the plate back..Leave a comment:
-
Thanks to rwdrift
Take out the stock white plastic bolt thingy's, line up euro plate filler. From inside the trunk, get a marker and draw holes on the back of the plate filler through the holes for the little white tabs you removed.
Drill filler.
Use nuts or some sort of rubber that'll hold the screws, tag and eventually the filler
You got yourself an euro plate filler now
I am going to do this and spray some undercoating on the isnide so no rust :)Leave a comment:
-
For mine (diving board bumper) I just matched up the plate and marked where the lic. plate mounts and drilled holes there and used the screws and mounted the plate.Leave a comment:
-
there is a how to some where on the forum..search plate and you'll see something.
the only thing i need to figure out before i mount mine is do i cut my rear plate or is it supposed to mount a different way.Leave a comment:
-
rofl thanks :)
Makes it so I can have both my cars in my sig for all forums!Leave a comment:

Leave a comment: