If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
Jean, if you're looking to find a late-model metal apron then you really should make it down to the east bay or south bay. Many of the Pick-n-Pulls and Pick Your Parts yards around here have late-model cars with the rear apron undamaged. You just need to bring a cordless reciprocating saw with a few batteries. You could probably get the piece for under $100.
Possibly the Stockton Pick-n-Pull might have one too, that's alot closer to you.
Jean, if you're looking to find a late-model metal apron then you really should make it down to the east bay or south bay. Many of the Pick-n-Pulls and Pick Your Parts yards around here have late-model cars with the rear apron undamaged. You just need to bring a cordless reciprocating saw with a few batteries. You could probably get the piece for under $100.
Possibly the Stockton Pick-n-Pull might have one too, that's alot closer to you.
Comment