M-Technic II drilling patterns and diagrams

[Jordan]

Someone is bound to have some of the diagrams indicating where holes need to be drilled for clips, screws, etc.

Also does anyone have a comprehensive list of all the hardware needed to mount the complete OEM kit?

[golde30]

this is from realoem. this is just the front bumper. u can find it all though, i put in: E30: 325i: Europe: 01/1991
then go: vehicle trim - and its all there...

02 INSTALLING SET SPOILER FRONT M TECHNIC 1 09/1987 51112239709 $460.91 See ABE 9786216, EBA 9788634
02 SPOILER FRONT M TECHNIC 1 09/1987 51712239865 ENDED
03 CLAMP M TECHNIC 7 09/1987 51712239711 $0.56
04 EXPANDING RIVET 8 09/1987 17111712963 $0.27
05 CLAMPING BOLT 2 09/1987 51711933719 $1.40
06 CLAMP 2 09/1987 51711922599
07 PLASTIC NUT M6 2 09/1987 16131176747 $0.48
08 AIR CHANNEL LEFT M TECHNIC 1 09/1987 51712238867 $26.51
08 AIR CHANNEL RIGHT M TECHNIC 1 09/1987 51712238868 $25.95
09 GASKET M TECHNIC 1 09/1987 51712239713 $11.83
10 FOIL M TECHNIC 1 09/1987 51712239714 $4.02
11 DRILLING STENCIL M TECHNIC 1 09/1987 51712239841
12 RETROFIT KIT, TRIM PANEL M TECHNIC 1 09/1987 51112239700 $374.98
12 TRIM PANEL M TECHNIC 1 09/1987 51112239864 ENDED
13 CLAMP M TECHNIC 8 09/1987 51112239701 $0.37
14 EXPANDING RIVET ? 09/1987 51111908077 $0.22
15 EXPANDING NUT M TECHNIC 2 09/1987 51112239842 $0.27
16 BODY NUT B4,2 4 09/1987 51112239707 $0.73
17 FILLISTER HEAD SELF-TAPPING SCREW ST4,2X19-Z2 4 09/1987 07119907809 ENDED
18 WEDGE M TECHNIC ? 09/1987 51112239702 $0.23
19 GUIDE LEFT M TECHNIC 1 09/1987 51112239703 $5.80
19 GUIDE RIGHT M TECHNIC 1 09/1987 51112239704 $5.84
20 BRACKET FRONT LEFT 1 09/1987 51111953097 $9.93
20 BRACKET FRONT RIGHT 1 09/1987 51111953098 $9.93
20 SUPPORT BUMPER BRACKET LEFT M TECHNIC 1 09/1987 51112239705 ENDED
20 SUPPORT BUMPER BRACKET RIGHT M TECHNIC 1 09/1987 51112239706 ENDED
21 COVER M TECHNIC 2 09/1987 51112239708 $9.60
22 HOLDING STRAP 2 09/1987 51111938263 ENDED
22 HOLDING STRAP 2 09/1987 51111973721 $0.56
23 SPACER BUSHING 4 51112238833 $0.21
24 SUPPORT M TECHNIC 2 09/1987 51712238866 $2.79

[Jordan]

this is from realoem. this is just the front bumper. u can find it all though, i put in: E30: 325i: Europe: 01/1991
then go: vehicle trim - and its all there...

Thanks... but I'm looking for a list based off someones experience. I have seen all the parts listings on REALOEM and I see alot of items I know aren't needed or have quantities either wrong, or not listed at all.

The side panels and skirts are my major concern, then the rear bumper. I will be running a fiberglass front so I can modify it so mounting that will be custom anyways.

[VAPORBLADE]

I will let you know soon...I have everything sides skirts will be here soon (hoping), pods/panels, bumper cover, front valance, rear bumper cover/valance, wing - all OEM. I have started going through all the hardware I need. I will be building a list as I go.

I might have extra items of some things (not a real bad thing IMO).

I also have the template for doing the front valance, and rear lower quarters (for the rear bumper valance). Like I said, it is all OEM.

[92 mtechnic cabrio]

go to the bmw dealer and ask for mounting sets

[Teaguer]

I've got the OE mounting instructions and parts list pamphlet for the rear bumper/valance .

For a small fee I can let you peek at it . :D

[Jordan]

Ha.. how about I charge you a storage fee on your ECU, coilpack, and AFM?

Vapor... keep me posted!

[VAPORBLADE]

Will do! Do you want to barrow the templates? They have been drilled though one time! ;) They worked for me, but I do want to hold onto them.

[Jordan]

For the sideskirts and panels surely, but I don't need them right now.. still have more parts to find! Appreciate it and I'm sure I will take you up on the offer at a later date.

[mbonder]

I have the templates for the side skirts and I have front fenders off a 92 mtech cabbie to show me where to drill for the front panels. As for hardware, I'm still piecing it together, but I should have a pretty comprehensive list soon. I'm hoping to get the whole kit on by the middle of october, all mounted and painted.

Matt

[PУCCKAЯ_e30ka]

I would check e30 zone if I were you!

[xLibelle]

if the IS skirts are the same mount points, i will report back as much within the week. i would size up my kit for mount points but the kit is 4-door and wont fit my 2-door.
mbonder, can you post the skirts measurements to see if what i acquire are the same?

sorry for the OT, but why'd you sell the e36, J? welcome back, btw

[fast1eddy]

I just removed the kit from my 92 Mtech cab. No its not for sale. There's a lot of hardware under there and some of it will break. I would suggest getting a few extra clips. I just ordered a new front spoiler and a few clips from the dealer. I'll be remounting everything in a couple weeks when the parts come in. I'll let you know how it goes.

[xLibelle]

fast1, take some measurements of the holes since you have the pannels off.
pictures help define your measurements. thanks

[xLibelle]

I could use these measurements!! (just the skirts actually)