Couple of questions

[GarrettM]

I picked up a Euro front bumper and Mtech 1 valence. How do I mount the bumper? Do I need different mounting brackets and what not? Also, it is missing a fog light lense. Are these just generic early style lenses? Also to paint the chrome, can I have the whole thing sand blasted and then painted?

Another thing, on my drivers door my key lock is horizontal and when the key I have that opens the trunk lock and pass. door lock does not even go in. Is the lock junk? Where do I get a new one?

There was another question I had but I forget. Will ask later.

[Court M3]

search this has been covered a few times for bumpers

[JasonC]

Real oem will be a big help to you. I was in a rush to put my front euro bumper on and never ordered the correct brackets for it, i made my own. They are only around $11.38 new. Here is the real oem link for the front bumper, http://www.realoem.com/bmw/showparts...33&hg=51&fg=15 . and the link for the lights, http://www.realoem.com/bmw/showparts...09&hg=63&fg=15 I can't find the part# for the early es/is fog light lense to cross reference it, to see if they are the same.

[GarrettM]

So alls I do is get 2 number 14s and take my old bumper and shocks off and mount it up? Thanks for the help.

[JasonC]

i think #14 comes with 2 brackets, just ask whoever you're going to order them off of if there is 2 or 1 per package. And of coarse you'll need the bolt that goes into that bracket from the bumper, unless you got extra bolt's laying around.

[GarrettM]

i think #14 comes with 2 brackets, just ask whoever you're going to order them off of if there is 2 or 1 per package. And of coarse you'll need the bolt that goes into that bracket from the bumper, unless you got extra bolt's laying around.

Ok cool. Saved the part numbers in my phone and going to the stealership tomorrow! Thanks for your help.

[GarrettM]

Cmon, no one can answer the lock question?