Removing Rain Gutter.

[Super Eta]

I have had a few people asking me to send this to them so i thought i would make a post on how to do it. :P


To remove the rain gutter moulding, first slide the clamp shown in the picture toward the back of the car, pry the moulding from the rain gutter. Twist and lift the molding as you go along. Before installation, replace any clips at the front of the rain gutter, and lightly lubricate the inside of the molding with silicone, Install the molding from the rear of the car forward.



Goodluck!

[Bill 84 318i]

I've found that triple digit speeds do the same thing.

Don't expect to get it back though.

[e9nine]

I've found that triple digit speeds do the same thing.

Don't expect to get it back though.

[kidrobot]

Shadowline Trim

Thanks Eta, I was going to actually post how to
take it off, but you beat me to it. btw, to keep in
bandwidth, anyone with shadowlines remember
what grit paper they used when they sanded the
chrome off the gutter trim? I was thinking 600grit
but don't want to do it a second time if I don't have
to....

[aaron_silva]

I believe it would be better to use a scuff pad.