rubber sides

[e30tyro13]

what is the best way to clean them
mine look like they are always dirty
there has to be something that cleans them well..
anyone?

[e30_3I8I]

goof off.... stuff like that

[Jand3rson]

Remove them, clean them with soap and water, then with acetone, and repaint them with either DupliColor trim paint or PlastiDip.

[faststatus]

2000 grit sandpaper is an option (wetsand), they will look shiny though, you can dull them back out a little with 800 if you want

[B-well]

i took my rubber sides and sanded the paint flakes off, scotch brite, adhesion promoter, scotch brite, base coat, clear coat, sand, buff. omg BRAND NEW