Who's E30 is this and what type apron is this?

[mini612]

[(NOTE) if this white car belongs to you, I apologize for not asking you for permission prior posting on revlimited.com. It's for the sole purpose of referencing your bumper because I have the same bumper on my car (actually to be my car) and with me lacking knowledge about these cars, I'm learning.]

I'm thinking about purchasing an E30 but it's front bumper is torned. So I was looking around and found a car that look similar to mine. It's an 1985 e30 323i the first picture below and the car that I'll be purchasing is the second picture. My question is where can I find this apron. The apron on my car is torned and the previous owner used some plastic black not-sure-what-type-stuff on it. Please look below for more explanations. I've also posted in my last previous post about me being new to E30 vehicles and currently doing lots of research and learning as much as I can, so any assistance will do.

[bmwguy325is]

Im guessing Hartage to match the wheels

[MrNatural]

Looks like Alpina...but I could be wrong

[JasonC]

Thats thors old car, http://www.r3vlimited.com/board/showthread.php?t=110157 And its a Zender airdam.

And if you want to see that valance on a black car :P

[mini612]

Looks like Alpina...but I could be wrong

I think you're right, I got it from a search...

[mini612]

Thats thors old car, http://www.r3vlimited.com/board/showthread.php?t=110157 And its a Zender airdam.

And if you want to see that valance on a black car :P

Thanks....now I need to find a front bumper...

[JasonC]

Whats wrong with the front bumper on the car you're getting? All i see looks like some bad trim, and here is the part numbers for it, http://www.realoem.com/bmw/showparts...33&hg=51&fg=15

The Zender mounts to the factory metal valance thats behind the bumper.

Edit: i take that back, looks like the turnsignal is sticking out on the bumper. It's part of the trim and housing on these bumpers, http://www.realoem.com/bmw/showparts...48&hg=63&fg=10

[bmwguy325is]

Im guessing Hartage to match the wheels

Looks like Alpina...but I could be wrong

Alpina thats what I meant LOL:drink:

[JasonC]

Alpina thats what I meant LOL:drink:

But you was still wrong lol :p


I'd like to see the rest of the car that the OP is getting!

[Mr.Wiggles]

Are you sure thats not a Zender front apron? It also looks like a Zender rear spoiler as well.

[JasonC]

here is a whole thread for Zender stuff. http://www.r3vlimited.com/board/showthread.php?t=120593

[mini612]

I posted in the General Discussion of this forum about a guy selling me his E30. This guy really knows nothing about this car. He told me that this car was his friends car given to him as a trade for one of his cars. He said that he traded a minivan for it. BTW, his friend is from TX.

If you look at the picture below, I got some work to do with the front bumper. It car needs a new apron, if not the Zender than another style.

Below is how the apron looks now. It's pined with a black-plastic sheet of some sort of side rail for hardware or yard work because the bumper is cracked and broken!!! The car certainly needs a car wash, and the steal-metal bumper needs to be realign...

[JasonC]

Looks like it needs some TLC, but would turn out into a good little car!