hey guys I've gotta replace the rubber grommet on my antenna but the old one dry rotted and the base of it is stuck within the fender and I can't figure out how to remove it. can you get to the underside of the antenna, or can you remove the top part of it so I can remove the remnants of the old grommet and install the new one?
-
"Once more into the fray."
sigpic -
You need to remove the antenna mast, it will be easier to take off the gomet that way, once the antenna is out.
Then repeat the process in reverse to put back.@IRON-E30 aka Edwin:D -
how do I remove the antenna mast? I tried unscrewing the top with a wrench (was 13mm) but it would only unscrew so much. I can't get the antenna itself to lift because I don't have the power antenna hooked up for the deck.Originally posted by IRON-E View Post"Once more into the fray."
sigpicComment
-
From the bottom, it's inside the trunk, you will need to peel the trunk linning on the drver's side and go to work.@IRON-E30 aka Edwin:DComment
-
yup here's a picture to help you outOriginally posted by IRON-E View Post
Just take off those screws at the bottom triangleComment
Comment