M3 bumpers

[e30ryan///m3]

Hi all,
I am in the middle of my e30 M3 cabrio project and need to know what parts I need to order to fit E30 M3 bumpers to my e30 325iC. I already have the front and rear fenders installed, I know I will probably need the bumer shock from an e30 M3 but are there any other parts I may need??

Thanks,
Ryan

[mikeedler]

look at the ETK I imagine you will need the side supports-they are different, as well as the front and rear mounts"as you call bumpershocks."

[rs4pro3]

Rear
http://www.realoem.com/bmw/showparts...08&hg=51&fg=15
Front
http://www.realoem.com/bmw/showparts...04&hg=51&fg=15
I'm not sure what you currently have, but above are links for part numbers

[Schnell 318]

if you have the stock shocks and rebar assembly from the cabby you should just be able to fab up some mounting brackets with some aluminum, there is no need to order all the parts off the m3 to make them fit.

[e30ryan///m3]

Thanks for the replies, but I ordered the shock mounts yesterday from the dealer. A buddy of mine works there and got me all 4 shock mounts for under $100 bucks.

Thanks,
Ryan