Calling anyone with an MTech II Kit...

[mbonder]

Alright, I just need to double check some things:

I'm checking out realoem.com for the mounting hardware for my mtech II kit and it doesn't really give you that great of an idea of what exactly you need. So I'm basically looking over the pieces (mainly the sides and lower front apron) in an attempt to count the mounting points and figure out what I need.

But it would be a great help if anyone who has gone through this sort of thing would offer up any knowledge of the mounting hardware.

Right now I've gone this far (everything references realoem's numbers from this: http://www.realoem.com/bmw/partgrp.d...63&hg=51&fg=15)

Front Spoiler: #3-7, 11, 13, 14, 15, 16, 17, 18, (23?, 24?)

Side Panels and Skirts: #3, 4, 5, 7, 8, 10, 13, 14, 16, 17, 19-23

Rear Bumper: #6, 7, 10-13, 20

Again anyone who can give me some help with this would make things run smoothly as I've got to get this stuff together for my friend whos doing all the body work on my car in a few weeks time. TIA

Matt

[e30-325boy]

Sikaflex. Clips will cost you an arm and a leg and the fit is not even that good.

[mbonder]

so I should just glue this shit on then?

[projecte30]

OK, here's what help I can offer:

Front Spoiler:
You need 7 of part 3 (pn 51712239711) the thing with these is you have to drill holes in your existing metal valance. That's what part 11 is for, but last time I checked it wasn't avaible so I just had to eyeball it. Not too hard.

You need 8 of part (pn 17111712963) these hold the spoiler from below, basically a reusable plastic rivot.

You need 2 each of parts 5, 6 and 7 these hold the soiler in place on the sides, again - more drilling to the metal valanve is required.

Rear Bumper:
Shouldn't need part 6, this is part of the hardware attaches the bumper core.

You need 2 each part 7 (pn 07119907957) , 2 each part 11 (note part numbers are left and right specific pn 51122239847 and pn 51122239848)
4 each part 12 (pn 51711939303) and 4 each part 13 (pn 51711936929)

As far as the side skirts go, the only help I can give is this - the clamps that hold the rocker panels on from below are different on coupes and convertables. I just bought I bunch of these for some coupe rocker panels but accidentally bought the part for the convertable, they aren't even close to the same!

Hope this helps some, and the price on this stuff isn't too bad.

[mbonder]

Thanks a bunch!!