Originally posted by trent
View Post
Announcement
Collapse
No announcement yet.
How to fab a mono wiper?
Collapse
X
-
Guest repliedif you do it right you won't break things..i was just drunk.
Leave a comment:
-
Originally posted by trent View Posti did it in about 4, including destroying my heater fan that I had to go back and redo....your point?
Leave a comment:
-
Guest repliedwhich linkage did you disconnect...the linkage AT the motor (the single 10mm) or the actual linkage arm that conects to the driver side?
Leave a comment:
-
Worked for me. I disconnected it and then moved the arms to the proper down position and then set it.
Leave a comment:
-
Guest repliedOriginally posted by DaveCN View PostIndeed. My car came to me with the park wrong and the wiper stopped in the up position.
Took maybe 10 minutes to fix it. You dont need to remove the linkage. Disconnect the linkage where it connects to the motor. Move arms to where you want them parked. Connect linkage.
Bam.
Done.
Leave a comment:
-
Guest repliedi did it in about 4, including destroying my heater fan that I had to go back and redo....your point?
Leave a comment:
-
Originally posted by trent View Postit isn't that hard..you are lazy.
ban
Indeed. My car came to me with the park wrong and the wiper stopped in the up position.
Took maybe 10 minutes to fix it. You dont need to remove the linkage. Disconnect the linkage where it connects to the motor. Move arms to where you want them parked. Connect linkage.
Bam.
Done.
Leave a comment:
-
Originally posted by trent View Postit isn't that hard..you are lazy.
ban
Leave a comment:
-
Guest repliedit isn't that hard..you are lazy.
ban
Leave a comment:
-
I'm confused...i haven't modded the linkage that needs used for the full sweep, i realized how much of a PITA it would be after bending my wiper arm and just parked it ricer style and sweep from there.
I need to get around to it soon.
Leave a comment:
-
Guest repliedOriginally posted by DaveCN View PostTherein lies the ricer mod.
Leave a comment:
-
Guest repliedOriginally posted by O 16581 72452 5 View PostI didn't mean the wiper arm, i ment the linkage arm.
Leave a comment:
-
Originally posted by trent View Postchange the park.
Even with a slightly bent arm (uh, the stock one) a full sweep linkage will still sweep the driver side.
Leave a comment:
Leave a comment: