Question for anyone with M-tech2 valence

[Mystikal]

Are the fog light cutouts large enough to be able to pull the fogs through them? As in, can you remove and replace the fogs without going from behind?

[e304lyfe]

Re: Question for anyone with M-tech2 valence

Are the fog light cutouts large enough to be able to pull the fogs through them? As in, can you remove and replace the fogs without going from behind?

i'm confused... the foglights are bolted in from behind... and are removed from behind on the later style valence.

m-tech II valence is only a skin that goes over the front end.

[Mystikal]

That's a popular misconception. To remove them all you have to do is unscrew the lower bolt on the front and push from the back. It takes 15 seconds, seriously.

[qimis]

jay,

are you getting mtech 2 ?

[bimmerphile]

the mtech II front does not overlap the fogs. I have a pic around here somewhere...


EDIT:

[M42Technik]

Yea you're fine, the fogs don't get in the way.

[Mystikal]

That looks really tight, I'm not sure one can pivot the light enough to get it off the little nib it mounts on towards the side of the car. Damn.