instructions for sealed beams to euro ellipsoids?

[bimmerphile]

EXACTLY!

jumping the relays is having no effect...

bert

Then do this:

http://www.mmsport.s5.com/foglights.html

[bert]

i figured it out...and i'm stupid...

the pictures were really small on the tech webpage...
so when i got to the 'jump the relay' part, i just used the
10mm mounting bolt for the relay/fuse box as a reference
for the high and low beam relays...it wasn't until i looked
in my Bentley that i realized my mistake...the Bentley has
a relay/fuse photo that identifys everything...that image is
a wider shot and reveals the location of the hood latches...
at that point i realized that everything i was doing was
upside down...apparently that 10mm mounting screw is
located toward the front of the car through 87 and against
the firewall on 88-up...closer examination of the images
confirmed the error with the missing fuse in the corner
for heated seats...

all works fine now...thanks

bert

[bimmerphile]

i figured it out...and i'm stupid...

the pictures were really small on the tech webpage...
so when i got to the 'jump the relay' part, i just used the
10mm mounting bolt for the relay/fuse box as a reference
for the high and low beam relays...it wasn't until i looked
in my Bentley that i realized my mistake...the Bentley has
a relay/fuse photo that identifys everything...that image is
a wider shot and reveals the location of the hood latches...
at that point i realized that everything i was doing was
upside down...apparently that 10mm mounting screw is
located toward the front of the car through 87 and against
the firewall on 88-up...closer examination of the images
confirmed the error with the missing fuse in the corner
for heated seats...

all works fine now...thanks

bert

:rofl: classic!


Not the first time that's happened, I'm sure.

[Ryan Stewart]

if you click they should resize.

Even so I did say to check the bentely for confirmation of relay location. :P