is there a write up for swapping 87i front for 87iS

[bfdbatt2]

just bought a used is air dam, going to get into mounting it this weekend. any pointers? searched late last night to no avail.....it looks like i need new fogs? any other advice? i have tucked dbs, been told it's a good fit, is this true?

[eyagel]

put it up there, put bolts in..pretty easy

[bfdbatt2]

not hardly. doesnt have the mounting hardware.....

[AndrewBird]

There are three plastic brackets, one on each side and one in the center. There are 10mm hex head screws that mount everything together. I think there are 9 total, 3 for each bracket. There is also a stud sticking out of each side that goes through a hole in the fender that a 10mm nut goes on. Basically it just bolts to factory holes, no modification.

[StereoInstaller1]

I got sick of the shitty sagging look that the stock 20 year old crap had.

I drilled holes in the top of the valence and the bumper and shot short lag bolts in. Hardly visible, considering the ride height.

GL!
Luke

[NC325iC]

i sent you a long ass PM back explaining step by step how to do it when you asked me

[td325ic]