removing stock sliders

[johnwoo]

hey guys trying to figure out how to remove my stock sliders. im looking at getting some new seats but want to use my sliders.

i see the slider is being held on by four bolts. the two rear ones are pretty easy but not sure how to undo the two front ones its funky looking. here are pics i snapped:







also this is the bolt to remove for the rear part of the sliders right?

[bejbis]

On the first pic, you push in that tab on the side of the 'pin' with a small screwdriver or similar, and tap it out with a hammer and punch from that side.

If thats the bolt that holds the seatbelt on, then yes, its the rear bolt.