Cabrio interior trim removal?

[benDASHDASH]

Today I attempted to rewire my car's speakers...

I didn't get too far.

I was able to remove the rear seat without issue. However, the panels on both sides of the rear seats are quite a challenge. I was able to pull out the small speaker cover, but I couldn't find a way to take the larger panel out. I don't want to break the thing. Have any of you done this?

[Mike 91 318ic]

after you remove the speaker covers unscrew it and lift up. You have to remove the interior sill panel and seat belt cover.

M

[benDASHDASH]

What is the interior sill panel? Is it the black weather striping? Does it pull right out? I just dont want to break anything. Thanks

[Mike 91 318ic]

sorry I meant the plastic sill panel on the floor that covers the frame. I had assumed you are running the wires down the side. You just have to pull off the weather stripping.

[benDASHDASH]

Great. One more Q... how the heck do i remove the sill panel? Do I pry the plastic fasteners out? I was attempting this yesterday but once again I didn't want to break anything. The black things are being a pain and a half to remove.

[Mike 91 318ic]

The clips are two parts, use a flat blade or a putty knife to pull out the center part.

M

[benDASHDASH]

Wazzing! Everything's removed. Thanks a ton for your help, Mike. Hopefully I won't have any further questions...

[Mike 91 318ic]

No problem if you need any help just ask

good luck
M