Heeeeeelp Please

[zoidberg]

ello ello,

So i just finished painting my 30, gave the clear a few days to fully cure and jumped in her to night to take it for a spin. Fun right? so jump in turn my lights on and bam. No interior lights?

Any thoughts?

details to help :

• Headlights on
• needles in cluster move
• check lights in cluster work
• no back lights in cluster
• no lights on heater controls
• the OBC lights up but when i turn lights on dims
• i recently pulled out my head unit
• im electrically slow.

Any ideas? Is there a ground for all those bits (cluster and controls)

Thanks all!

PS ill get no blackberry pics up after shes wet sanded and buffed.

[AndrewBird]

Did you check the fuses?

[zoidberg]

Did you check the fuses?

of course

[transatlantic0207]

well you pulled out the radio. So if it was working prior to that, then you have a starting point. Backtrack your steps, check connections and if there are any exposed wires (there absolutely shouldn't be though!) be sure they're not touching and shorting out and while you're in there insulate them.

[zoidberg]

well you pulled out the radio. So if it was working prior to that, then you have a starting point. Backtrack your steps, check connections and if there are any exposed wires (there absolutely shouldn't be though!) be sure they're not touching and shorting out and while you're in there insulate them.

didn't mess with any connections. just pulled the harness off and that was it. Is there like any one plug in there that controls all that lighting? Any chance when i pulled the radio forward a wire got snagged and unplugged?

[ThreeTwentyFissel]

Retrace your every steps, am sure its a simple overlooked fix!

[zoidberg]

umm, so i put my rear bumper back on... They started working again, for now. :giggle: