Announcement

Collapse
No announcement yet.

need help with headliner

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    need help with headliner

    plz dont bash me i searched lol i cant find a diy on how to remove headliner adn hat rack in back behind seats along with pillars . as im planning on re wrapping intior in black suede this winter :) and getting a nardi wheel :P ;)
    sigpic
    DO WORK

    #2
    Remove/or pull down the door seals. Remove the sun-visors, remove the grab handles, remove the interior lights, remove the rear/side glass. Remove the front upper headliner part....roll the sunroof (if your has one back), remove sunroof hardware. That will get you started.

    Removing back seat/ speaker shelf will also help.
    Mtech1 v8 build thread - https://www.r3vlimited.com/board/sho...d.php?t=413205



    OEM v8 manual chip or dme - https://www.r3vlimited.com/board/sho....php?p=4938827

    Comment


      #3
      ^ what he said, but here are some details.

      End covers for the handles pop off from the end and slide up the handle to expose the screws.

      There is a screw on the B pillar hooks as well

      lights pop out

      You have to remove the glass because the edges of the headliner wrap under them. That's a whole how to in and of itself.

      A pillars have a clip near the top and then slide up and out.
      I don't always wreck cars, but when I do I wreck them into trees.

      91' 318is S50 swap - The Black Widow

      Comment


        #4
        ahh wat glass specifically its a 2dr .. the pop out windows ? and anyone know that diy lol
        sigpic
        DO WORK

        Comment


          #5
          all the glass, front, rear, pop-outs, and you will need to take the door seals off.

          i put a new headliner in my car... not for the faint of heart..haha






          Full Build Thread Here

          Comment


            #6
            hmm i have done glass on fords im guesing u use the heat and wire trick / tool
            sigpic
            DO WORK

            Comment


              #7
              no. Side windows are just a U channel where part of the seal is inside and part outside. Front and rear glass is a rubber molding that the glass fits into and a lock strip that fits inside a channel on the outside to lock the glass into place. Take a look and you'll understand.
              I don't always wreck cars, but when I do I wreck them into trees.

              91' 318is S50 swap - The Black Widow

              Comment


                #8
                nice any diys ?
                sigpic
                DO WORK

                Comment

                Working...
                X