5 pt. harness install help

[Oolop]

i have a corbuea fx1 pro seat and am purchasing a 5 pt harness. i dont have a cage or even bar for the shoulder harness.

is there anyway to install the shoulder harnesses with out the use of either options said before?

[KenC]

Why are you running a harness without a roll bar.

[325ix]

Why are you running a harness without a roll bar.

Because he doesn't care about safety. They are purely for looks.

[MaksV]

how much do you care about your spine?

[Jaxx_]

how much do you care about your spine?

walking is overrated

[bmwguy325is]

how much do you care about your spine?

Yes this. If the angle is not much coming off the back of the seat you can use the rear seat belt mounting location. However I doubt the straps are long enough. For the fifth point you need to make a hole in the floor or weld in a plate to attach it to. If you want the look and still want to be safe go buy a http://www.hmsmotorsport.com/store/schroth-tuning-belts.

[KenC]

A 4-point one is fine for an open lot autocross. I wouldn't ever wear one on a track without a cage. The anti-submarine belt is to prevent you from sliding under the dash in a front end collision. You should have a cage if you're going fast enough to necessitate the 5th point.

[325ix]

Yes this. If the angle is not much coming off the back of the seat you can use the rear seat belt mounting location. However I doubt the straps are long enough. For the fifth point you need to make a hole in the floor or weld in a plate to attach it to. If you want the look and still want to be safe go buy a http://www.hmsmotorsport.com/store/schroth-tuning-belts.

The thing is, he is using fixed back seats with the harness, which as we know, don't collapse in a roll over.

[Oolop]

i dont have a spine

just seeing options