Vaders in a Vert

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • mitchlevy7
    Mod Crazy
    • Aug 2011
    • 672

    #1

    Vaders in a Vert

    I recently bought vaders and Robert Ks adapters to put in my vert, and Im having tons of trouble getting them in.
    its not a problem with the adapters, and I have looked at pictures to double check that they are oriented correctly.

    It seems like the problem is that the cabrio is a little narrower then the sedan and coupe models. I took off all the trim and moved everything out of the way to try to get it to fit better with no luck.

    When the seat is placed in there, it seems like the bolster is always touching the center console, the sliders on the seat are far to the sides.

    I may try to modify the adapters and notch the holes to get some more adjustability, but before that I wanted to see if anyone has had any luck with this, or has pictures of an install.

    I have searched this, only to find vague answers and dead links.
    www.cp-e.com

    1989 Zinno 325i m52 turbo coupe
    2015 Ford Fiesta ST, Daily Driver.
  • rkettner
    Grease Monkey
    • Jun 2007
    • 367

    #2
    i'd imagine that they are narrower because of the extra metal needed to stiffen the chasis

    Comment

    • mitchlevy7
      Mod Crazy
      • Aug 2011
      • 672

      #3
      yea. ive looked at pictures of just the adapters on the floor of a sedan and they seem to have at least an extra inch on each side of the adapter. However, I KNOW theres people with vaders in verts.
      www.cp-e.com

      1989 Zinno 325i m52 turbo coupe
      2015 Ford Fiesta ST, Daily Driver.

      Comment

      • mitchlevy7
        Mod Crazy
        • Aug 2011
        • 672

        #4
        nothing?
        www.cp-e.com

        1989 Zinno 325i m52 turbo coupe
        2015 Ford Fiesta ST, Daily Driver.

        Comment

        Working...