M-Tech I steering wheel installation issues

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • amcink
    Mod Crazy
    • Jan 2012
    • 788

    #1

    M-Tech I steering wheel installation issues

    Hello
    I have a M-Tech I steering that I have installed on my eta; however the turn signal stalk is not returning does not disengaged once you made a turn therefore the steering wheel is not helping disengaged and also the horn is not working from the M-tech any ideas? Do i need to push further the steering wheel?
  • audiquattrot
    No R3VLimiter
    • May 2008
    • 3836

    #2
    Are u sure the steering wheel is pushed all the way in? Are you putting an mtech1 onto an airbag car w spacer? If so the spacer needs to go on after u slip on the wheel
    www.instagram.com/snwmble
    #snwmble

    Current:
    '05 BMW M3 - Silver Grey/Imola Red
    '90 BMW 325iX - Sterling Silver/Houndstooth sport(5-speed converted)
    '15 Mini Countryman - Blazing Red/Carbon Black

    Past:
    '01 Audi Allroad - Light Silver/Platinum Saber Black
    '88 BMW 325iX - Diamond Schwarz/Silver sport *Sold*
    '01.5 1.8TQ - Brilliant Black/Nogaro Alcantara ...after 8.5yrs, *Sold* =(
    '90 BMW 325i - Schwarz/Tan sport *Sold*
    '89 BMW 325ix - Diamond Schwarz/Black sport *Sold*

    Comment

    • amcink
      Mod Crazy
      • Jan 2012
      • 788

      #3
      Put this on a non airbag car

      Comment

      • e30 gangsta
        No R3VLimiter
        • Jul 2004
        • 3877

        #4
        Clean the contact on the back of wheel. Apply some grease and re install?

        Comment

        • MR 325
          Moderator
          • Oct 2003
          • 37827

          #5
          The M-Tech wheel is a direct swap to your car. Sounds like you did something wrong?!
          BimmerHeads
          Classic BMW Specialists
          Santa Clarita, CA

          www.BimmerHeads.com

          Comment

          • Pocket Chant
            E30 Addict
            • Mar 2012
            • 403

            #6
            There should be a black plastic tab sticking out from the back of the wheel. Is that still there?
            1987 325is, S50B30US, Kamei side skirts, Zender Spoiler.
            MT2 Wheel, 95 M3 Rack, Condor Speed Shop knob, UUC SSK w/ DSSR, Billy Sports/GE Coilovers, KAMotors CAI.


            Originally posted by MclubSport
            Why you have a badge on wheel ? You do not know what car you have? But if you have a mustache, you know better where is your mouth?

            Horrible with responding to PMs, I'm so sorry.

            Comment

            • Drift Unit E30
              Noobie
              • Jan 2013
              • 9

              #7
              pocket,

              i have an ordinary body kit on my 1986 325i , and i want to fix all mtech body kits,
              what exactly i am looking here??

              Comment

              Working...