Cluster bulbs, I am missing!

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Mastrcruse
    R3V Elite
    • Sep 2005
    • 5340

    #1

    Cluster bulbs, I am missing!

    Hey guys,
    I finally got around to painting my needles red.

    Well I pulled the cluster out and can't remember where the 2 bulbs went too in the car.

    I am missing 7 bulbs total on the bottom of the cluster. I am have 1 bulb in the car closest to the driverside door and it shuts off when the car is on, so I am guessing this is the check engine light.

    One the other side of the cluster (passenger side) I have 1 bulb hanging and it stays on with the cluster out. I haven't had any of the bulbs stay on in the car when the cluster was in so I dont' know where this bulb goes.

    I released the ebrake and it still did not shut off. I don't know where it goes! I dont' know how to tell if I have ABS or not because I have never felt my car pump its brakes.

    I don't know where this thing goes. Any ideas?

    Thanks
    DJ
  • Mastrcruse
    R3V Elite
    • Sep 2005
    • 5340

    #2
    Here is the pic and the bulbs that I am missing on the passenger side. I have only 1 bulb to put in these 2 spots in the car.
    Attached Files

    Comment

    • Mastrcruse
      R3V Elite
      • Sep 2005
      • 5340

      #3
      Here is the driverside, I have 1 bulb in the car for this side also. It turns off after the car is turn on so I am guessing it is the check engine light.

      What bulb turns on the 4 ways though?
      Attached Files
      Last edited by Mastrcruse; 05-27-2007, 02:53 PM.

      Comment

      • Mastrcruse
        R3V Elite
        • Sep 2005
        • 5340

        #4
        Anyone help me out?

        Comment

        • AlarmedBread
          E30 Mastermind
          • Sep 2006
          • 1510

          #5
          Just go to radioshack or similar store and buy all new bulbs, they are cheap.

          Comment

          • doucy2
            E30 Fanatic
            • Sep 2006
            • 1311

            #6
            silly why did you take al lthe bulbs out? the only things lights you needed to take out were the two the are attached to the wiring harness (that go in the star shaped inlets.)

            Comment

            Working...