Announcement

Collapse
No announcement yet.

After putting in my mtech2 wheel, the blinkers don't reset

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    After putting in my mtech2 wheel, the blinkers don't reset

    My blinkers don't reset to the original position after making a turn now. Any idea what the problem may be?

    Thanks,

    Ben

    #2
    you spaced it out too far or the tab on the back is broken off.
    Originally posted by Gruelius
    and i do not know what bugg brakes are.

    Comment


      #3
      ok, well it wasn't actually me who put it on... previous owner. But i will take it off and look for what you suggested. Thanks!

      Comment


        #4
        Check the pawl on the turn signal switch itself. With the wheel off, when you engage the turn signal either left or right, a small plastic pawl should stick out, which will cancel the turn signal as the wheel turns and the little 'arm' on the back of the wheel sweeps across it.

        If the previous owner did not ensure that the turn signal was in the center/neutral position when he put the wheel on, he may have snapped it off.

        Voice of experience... :(
        John in MD - 1991 318is
        190k miles and still rolling!

        Comment


          #5
          well looks like the tab is broken off. I'm going to try to cut the tab off my other wheel and glue it on. It may work... may not.

          Comment


            #6
            get a ...

            use a thin sheet metal as backing and glue it on as a brace, or else that thign will fall of instantly.

            Comment

            Working...
            X