How do you remove the head lamp switch panel

[profbooty]

So I need to swap out my headlamp switch, I have to jiggle it in order to get the headlamps to turn on, while the other lights stay on.

How do you remove the panel which holds the fog lamp/head lamp switch?

[TDE30]

Remove knee bolster, and there are (IIRC) two nuts that need to be removed to access and remove it.

[Aptyp]

Remove right nut (passenger side), then pull on the panel and slide it toward passenger side. That will remove the panel. Unplug wires and you're there. Second nut is there to hold panel snug in place, but it slide out very easily.


To remove your light switch, pull on the knob (jerk) until it comes off, then from the back side light switch easily unclips and comes out.

[scott_is]

Remove right nut (passenger side), then pull on the panel and slide it toward passenger side. That will remove the panel. Unplug wires and you're there. Second nut is there to hold panel snug in place, but it slide out very easily.


To remove your light switch, pull on the knob (jerk) until it comes off, then from the back side light switch easily unclips and comes out.

NO its screwed just unscrew the knob