Late fogs install??

[Jose Luis]

I need some detailled pics of how the fogs are installed on the fender, I need to send them to the workshop so they can install it properly

[gearheadE30]

there are 4 bolts, I think 8 or 10 mm or something holding the bracket onto the frint valence. Unscrew those and unplug the fogs and they are out.

[Jose Luis]

I know it´s pretty easy, but I think there´s a part missing that goes attached to the fender where the upper bolts are screwed, the problem is that the fender is new (used) on the car, and the rigger bend the lower holes and now the fogs doesn´t fit.

[gearheadE30]

yeah, the valences can get bent up pretty bad. It doesn't take much to screw up fitment. I actually used a hammer and some pliers to bend it back to roughly stock dimentsions.