Just need a sligh confirmation. Sealed->Euro Smiley Ellipsoid.

[r0meyrome]

So Ive done some researching and basically all I need to know to make the euro smiley ellipsoid to work is this:

Ground on the reflector and Power from the bulb-> Wires with connectors to fit into the Ground and Power of the original sealed beam harness.

I don't have the covers as of right now but I would like to make it work somehow.

[E30_fiend]

sealed beams have 3 wires while the euro ellips have 2. there is only need for one of the colored wires from the stock sealed beams.

so its a form of trial ad error. hook up the ground to the ellip housing and touch one of the power wires to the prong on the backside of the bulb. If the light lights up then thats the one you need. the other wire can just be capped and set aside. Do the same on the other side.








Taylor