H4 Question?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • ///Bimmerfan
    Mod Crazy
    • Dec 2008
    • 730

    #1

    H4 Question?

    I have a 86 325es with sealed beams and I wanted to know if these would just plug and play? http://cgi.ebay.com/ebaymotors/ws/eB...name=DCP:RV:GI

    Thanks
  • M-technik-3
    I waste 90% of my day here and all I got was this stupid title
    • Oct 2003
    • 18946

    #2
    Minor wiring at plug change required. Autopal are not as nice as Cibie or Hella but the curved glass helps with less pitting vs flat faced H4 lamps.

    Autopal makes replacement lights for motorcycles.
    https://www.facebook.com/BentOverRacing

    Comment

    • JasonC
      Site Manager
      • Aug 2006
      • 14451

      #3
      I have those Autopal H4s in my S-15 (mine is square not round of coarse). Direct plug in. But the light fit really loose in the sealed beam bucket. It does have the euro cut off _/_/ and i really like the high beam on the dark country roads at nite. The low beam is ok but could be alittle better.

      1992 BMW 325iC
      1978 Chevrolet Monte Carlo
      1965 Chevrolet Corvair Monza 140hp

      Comment

      • ///Bimmerfan
        Mod Crazy
        • Dec 2008
        • 730

        #4
        Originally posted by M-technik-3
        Minor wiring at plug change required. Autopal are not as nice as Cibie or Hella but the curved glass helps with less pitting vs flat faced H4 lamps.

        Autopal makes replacement lights for motorcycles.
        What would I need to do to make them plug and play then?

        Thanks guys

        Comment

        • M-technik-3
          I waste 90% of my day here and all I got was this stupid title
          • Oct 2003
          • 18946

          #5
          Plug the back in make sure the low illuminates the low and the high the high. If not swap the wires. I had to do that with my h4 conversion.
          https://www.facebook.com/BentOverRacing

          Comment

          Working...