HIDs in fogs.

[pinoy325i]

hey r3v i know the foglights take h3 hid bulbs. i was thinking of getting the ddm ones and was wondering if you could help me out on what i need? how hard is it and what would i need to to do make them work? Thanks and Godbless.

[Fidhle007]

Can't be done.

[AlpineM325]

I have HID in my fogs. you just need the HID kit, drill a whole big enough for the grommet (supplied in the kit) to fit and plug and play. Not hard.

[ob_318is]

hey r3v i know the foglights take h3 hid bulbs. i was thinking of getting the ddm ones and was wondering if you could help me out on what i need? how hard is it and what would i need to to do make them work? Thanks and Godbless.

This write up has the HID Fog Light Install... This is what i used, good luck. http://r3vlimited.com/board/showthre...hlight=DIY+hid

[Kev]

Do what ^^^^he said ... plug in the red to positive and black to.ground of course.... yu don't have to break the metal piece that's already connected just open that ground connection plug in black wire and close up.connection and yur good...... make sure yu make thee whole directly in the middle while doing this... there's a DIY search it up less then 30 min if yu have the thing to make the hole

[ob_318is]

yup simple, I need help with wiring my city lights, simple write up, but it keeps blowing fuse 22.

[bzboardz]

yup exactly how i wired mine up^^ i found some extra plastic and cut that to shape instead of drilling the cap but either way works. good luck

[pinoy325i]

thanks guys. and about the plastic? which types of plastics should i stay away from because wouldn't they melt?