Announcement

Collapse
No announcement yet.

Tailight wiring

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    Tailight wiring

    Hey guys can someone please take a pic of the wiring for the connector that goes into the right tailight assembly? Im having some problems getting the reverse light to work and its pissing me off. Everything else works
    I have the early model lights.

    #2

    Comment


      #3
      Most likely your reverse light switch on the transmission.

      Comment


        #4
        Originally posted by glucklich21 View Post
        Most likely your reverse light switch on the transmission.
        Is it on the left or right side? I have one sensor thats just kinda hanging...

        Comment


          #5
          On my car, E30M3, the reverse light switch is on the driver's side of the transmission. Reverse switches are a common fail item and fairly easy to replace.

          Also, lift up the shifter boot and check the condition of the wires as they come up into the car. Originally they were routed through a hole in the shifter boot. Over the years they just get pushed around the metal edge and wear through or break.

          If you have the time and inclination, make up a beefier wire harness. At the connector under the center console, splice in some 14g or 16g zip-cord and some crimp on quick disconnects. Right angle preferred. There should be some little metal tabs in the transmission tunnel to keep the wire out of harms way.

          Comment

          Working...
          X