ellipsoid smoking

[Rennsport]

I just purchased a set of ellipsoids and I really want them smoked. Ive read the DIY and decided that i would rather not DImyS.

Is there anyone who would be willing to smoke them for me? Obviously I would pay them for their time and making it look better then i could.

p.s. I dont know if this in the right area, feel free to move it Mods (even though you'd move it if i didnt say that...)

[O 16581 72452 5]

If you mess up, just take it off with acetone. I used "annodized look" paint to do mine, looked good, when i decided i didn't want it anymore, off it came with no problem. Comes off as a film before it dries completely as well if you decide sooner than about 10 minutes if you don't like it.

I'm not sure they have grey/black, i used yellow.

Easy to make look good though man, follow the directions on distance to hold and spray very thin until you get the look you want.

[karzrtoyz]

Its easy to smoke them , but just time consuming. This is what you need:

Dremmel with disk cutter
Permatex- clear RTV SILICONE
High temperature semi gloss black paint
Crosshair pattern for cut outs
Sheet of tin metal
tin shears
black Sharpe marker
And a shit load of time and patience!

Here's a set I just made:


heres the pattern: you trace then dremmel it into shape-

[shiftbmw]

I suppose the best way to smoke them would be to crush them up into tiny pieces with a hammer to ensure that they easily fit into your pipe.





j/k i'm bored

[mikeedler]

sure looks like one of the sets I made. I wouldnt use RTV/permatex. It wont hold a good seal on the glass very long. You need to use a windshield glue.-4 glass. You need to be very careful, and probably have an extra lens or 2 around if its the first time your trying it.
isnt there another are on this forum for this topic anyway.

[Jand3rson]

Please try to put threads in the correct forums, guys. General discussion isn't the only forum on the board!

[Rennsport]

Please try to put threads in the correct forums, guys. General discussion isn't the only forum on the board!

sorry i wasnt sure where to put it...

I suppose the best way to smoke them would be to crush them up into tiny pieces with a hammer to ensure that they easily fit into your pipe.
j/k i'm bored

lol

[Jand3rson]

sorry i wasnt sure where to put it...

R3VLimited Forums > Technical > Appearance & Cosmetic > Lighting

Just look through the sub-forums before you post. It's all there. :up:

[golde30]

[crunk3]

HAHA awesome

[NABR 1337]

lol