H.I.D. question

[mck]

Anyone know of XENTEC or McCulloch , and are they any good?

[PiercedE30]

get the x85 connector version!!! it makes it so much easier..................




lol

[maniacmatt]

If you get the prolumen H1 kit it will be 100% plug and play. Except for drilling a couple of holes in the back of the plastic covers for your lights.

The prolumen H1 kit has an H1 bulb but the ballast uses a 9006 connector.

I just installed their kit on my euro ellips and can help you with picture or anything you need.

[E30_fiend]

ok cool thanks guys

E30Fiend

[Dustin]

thanks guys. so let me see if i got what most of you were suggesting...i SHOULD get the H1 kit? most of you said the H1 kit but some said the 9006 kit. just some clarification please.

thanks
E30Fiend

they all said get the H1 kit, depending on brand, you may need the 9006 plug to plug into the ballast. right now, you're worried about what will fit into your housing, which is an h1.

[backtrail69]

You need the H1 kit.

[E30_fiend]

thanks guys. so let me see if i got what most of you were suggesting...i SHOULD get the H1 kit? most of you said the H1 kit but some said the 9006 kit. just some clarification please.

thanks
E30Fiend

[backtrail69]

I have a set of velocitygetter 6000k HIDs in my Euro Smilies, they are great. I love them. Two wire hookup and plug in a couple connectors and mount he ballasts.

[Van Westervelt]

On all my HID kits (4) I got H1's and on the ballast, the 9006 connector plugged right into it in place of the wiring adapter provided. Less custom, literal plug and play except on the fixture.

[e30frosh]

4500k prolumen and 4300k apexcones....Both worthy sets.

[JasonC]

I got the same kit that smonkbmw has in his but i got 6000k H1's. It is a very good kit and they are sick like he said.

[smonkbmw]

my hella smileys are h1 and i have the prolumens 5k kit.you need 9006 plugs to go into the ballast on the prolumens and then you have the h1 bulbs. there shouldnt be any rewiring needed if you still have the 9006 plugs installed. go to bimmerforums under the GB section and pick up the prolumens kit from Habbie for $255 shipped. theres a bunch of us here in the portland area running them, they are sick!!

[E30_fiend]

cool thanks guys

E30Fiend

[JasonC]

Yes, just get the H1 kit. and rewire for them. It's a simple install iirc.

[Mike325]

Ya soo the bulbs are h1 right? Just do the cutting I mentioned and that should be ok.