Calling all alarm/wiring/central locking GURUS

[blocke]

I am in the process of installing a viper Responder LE 5701 into my 90 325i.
I am running into issues with the central locking wiring on the car and the alarm.

The alarm provides 2 door unlock wires:

a (-) negative lock/ (+) positive unlock
or
a (+) positive lock and (-) negative unlock.

I'm understanding that E30's central locking requires a ground to lock the doors.
Can anyone point me in the right direction as to how I should wire the alarm for keyless entry? I have found the appropriate wires under the drivers kickpanel, (green/brown and green/black) but by grounding green/black out, the locks just lock and then unlock right away.

Am I missing something, do I need a special relay? I can adjust the number and length of pules from the alarm, but I dont think the wiring is correct.

HELP!

[accident]

keep in mind if the central locking is triggered to lock with the driver door open it'll pop the locks right back up...

[StereoInstaller1]

Can anyone point me in the right direction as to how I should wire the alarm for keyless entry? I have found the appropriate wires under the drivers kickpanel, (green/brown and green/black)

Wrong wires: www.the12volt.com will show you the right ones