we got a parts car in at work, and i got to take what i wanted, well i opened the trunk to see the "wall o' amps" and knew it had a good system. so i took everything except the RCA's from the deck to the amps and the speaker wire. it's 2 amps and all the little power wire shits all mounted to a piece of plywood covered with carpet, not too shabby. Here's the list of equipment (pics at the bottom):
-Coustic U Power Logic (AMP 160u 35 watts) small one, was used to power basspump.
-Coustic Power Logic Component (AMP 268 4x45 watts RMS) big one, used to power front and rear speakers
- 2x Rockford Fosgate "The Punch" 4 ohm speakers. were used in rear.
- 2x Infinity Reference 502i. used in front.
- Design Reference DR-328 BassPump. wierd ported enclosure with two 8 inch subs firing toward eachother, PO had it set up so that the enclosure was bolted up to the rear shelf and fired through a hole he drilled in the metal and the shelf covered by a speaker grill. looks ghetto, but might be sweet with two new 8 inch subs in that enclosure mounted the same way.
anyone konw anything about this equipment? is it any good. im gonna use it either way, but i want to know what i have. also, any suggestions as to how i should set it up? im thinking of just copying the way it was, but any suggestions are always appreciated. now on to the pics....







thanks in advance guys for any help!!!
-Coustic U Power Logic (AMP 160u 35 watts) small one, was used to power basspump.
-Coustic Power Logic Component (AMP 268 4x45 watts RMS) big one, used to power front and rear speakers
- 2x Rockford Fosgate "The Punch" 4 ohm speakers. were used in rear.
- 2x Infinity Reference 502i. used in front.
- Design Reference DR-328 BassPump. wierd ported enclosure with two 8 inch subs firing toward eachother, PO had it set up so that the enclosure was bolted up to the rear shelf and fired through a hole he drilled in the metal and the shelf covered by a speaker grill. looks ghetto, but might be sweet with two new 8 inch subs in that enclosure mounted the same way.
anyone konw anything about this equipment? is it any good. im gonna use it either way, but i want to know what i have. also, any suggestions as to how i should set it up? im thinking of just copying the way it was, but any suggestions are always appreciated. now on to the pics....







thanks in advance guys for any help!!!
Comment