where can I get connections so I can hook up these heated mirrors. I checked out radioshack, no success. I prefer not to solder. thanks.
-
where can I get connections so I can hook up these heated mirrors. I checked out radioshack, no success. I prefer not to solder. thanks.Renting my rear wheel bearing tool kit. SIR
http://i25.photobucket.com/albums/c5...ps6debf0b0.jpg
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image. -
Mmmmmmsigpic -
george graves?Renting my rear wheel bearing tool kit. SIR
http://i25.photobucket.com/albums/c5...ps6debf0b0.jpg
Your signature picture has been removed since it contained the Photobucket "upgrade your account" image.Comment
-
japan andrew did this.
go through his build thread
its earlier in the pagesComment
-
Use a small female spade and crimp it good....Comment
-
Those are solder-able as well, but I don't know how you'd get the mirror off then.
Look for female spades with a dimple in them that matches the hole. It sorta locks it in. I can never find connectors that small locally. I'd try mouser, jameco, or mcmaster.
Is it in the ETK? Another thing you could try is they look the exact same as the two bulbs on the cluster that have their own wiring.Originally posted by Matt-BComment
-
Or maybe solder a 1"+ section of wire onto it with a male/female spade connection of your choice on the other end. That would be my 2nd route if not stock.sigpicComment
Comment