Installed elipsoids now my high beam wont work

[Fomocogogo]

Just installed some elipsoids. Cut and spliced the wires. I had the lights on and touched some wires on the elipsoids together and the highbeam turned off. I hooked that same highbeam up to the drivers side and it works. Checked the fuses, then used a test light to see if it was getting power. It is not. Any ideas?

[khalild]

If it isn't getting power at the fuses, you may need to replace the relay. Get a cheap one from one of the bmw online stores, or get it from the dealer. Do some wire chasing as well. You may have just lost a connection somewhere. AKA fried wire