Fuse #10

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • Kev
    JMP Autowerkz
    • May 2009
    • 1575

    #1

    Fuse #10

    Alrite guys ever since i did my 5 speed swap fuse #10( has been going out.
    ive replaced in 3 times now.
    today was the third time but now the car just cranks but wont turn on.
    any ideas on what it could be?
    could a relay or dme get fried after so many fuses blown??

    And BTW the fuse would always blow when car was running.

    "Hard Work Pays Off"



    1991-bmw 325i (R3vvd)
    1990- 325 (mpowa)(GC)(track)(beast)
    1988- 528e (daily driven when track car broken)
  • StereoInstaller1
    GAS
    • Jul 2004
    • 22679

    #2
    Check the wires that go through the boot into the transmission, the reverse light wires.

    Common #10 issue.

    GL!
    Luke

    Closing SOON!
    "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

    Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

    Thanks for 10 years of fun!

    Comment

    • Kev
      JMP Autowerkz
      • May 2009
      • 1575

      #3
      Originally posted by StereoInstaller1
      Check the wires that go through the boot into the transmission, the reverse light wires.

      Common #10 issue.

      GL!
      Luke

      I checked them already and they are fine but ill double check tomorrow.

      Any idea what can be causing the engine not to start?

      "Hard Work Pays Off"



      1991-bmw 325i (R3vvd)
      1990- 325 (mpowa)(GC)(track)(beast)
      1988- 528e (daily driven when track car broken)

      Comment

      • StereoInstaller1
        GAS
        • Jul 2004
        • 22679

        #4
        Swap a fresh fuse in and it starts?

        Closing SOON!
        "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

        Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

        Thanks for 10 years of fun!

        Comment

        • StereoInstaller1
          GAS
          • Jul 2004
          • 22679

          #5
          Fuse 10 also runs the neutra safety switch, the check engine light, all kinds of shit.

          Did you download the ETM yet?

          Closing SOON!
          "LAST CHANCE FOR G.A.S." DEAL IS ON NOW

          Luke AT germanaudiospecialties DOT com or text 425-761-6450, or for quickest answers, call me at the shop 360-669-0398

          Thanks for 10 years of fun!

          Comment

          • Kev
            JMP Autowerkz
            • May 2009
            • 1575

            #6
            well i got the wires where it was shorting out and it was from where it goes under the boot to the tranny.
            the wire was hitting on the guibo making it rip.
            No my problem is my car wont start.. i gget fuel but no spark now.

            "Hard Work Pays Off"



            1991-bmw 325i (R3vvd)
            1990- 325 (mpowa)(GC)(track)(beast)
            1988- 528e (daily driven when track car broken)

            Comment

            • Kev
              JMP Autowerkz
              • May 2009
              • 1575

              #7
              Is there a way a fuse can POP every single injectors ??

              "Hard Work Pays Off"



              1991-bmw 325i (R3vvd)
              1990- 325 (mpowa)(GC)(track)(beast)
              1988- 528e (daily driven when track car broken)

              Comment

              Working...