Condensation on amp--anyone have this problem?

[Wh33lhop]

Damn it, as soon as I get my replacement amp in (first one was defective) less than a week later it is in protect mode and there is a bunch of condensation formed on it. I'd assume a bead of condensation formed shorting one of the outputs or something, and it had just rained a bunch, but I never saw this coming of all things.

I don't have any trunk leaks, but I guess the next course of action is to take the amp apart, let it dry out and replace my trunk seal/tail seals... I am curious if anyone else has had similar problems.

[nrubenstein]

You could start with a description of where you mounted the amp...

[Wh33lhop]

On the back of my Luke box.

[ck_taft325is]

Tail light gaskets.

[jaywood]

Tail light gaskets.

This

[nrubenstein]

I'd also check the sunroof drain. It's connected to the vent in the driver's side well and it's frequently disconnected.

If all that fails, look at the antenna.

[EN318isPDX]

Normally leaks from the top left of the trunk gasket, water pools there. If not that its one of the 2 other things listed