keyless ignition with toggle switches and push button

[e30work]

relays R1-5 are 4 pins, relay R6 is 5 pins.
relays must be at least 30 amps. im using 50 amp relays
colored wires with no letters attached to them are just connection/jumper wires.
wires must be at least 10 awg.

i have a 91 e30 318is and this is for factory action.

[Vtec?lol]

huh?

[ak-]

[TurboJake]

Why not just make a wiring diagram and use the factory harness?
Or would that make it too easy, you know, not having to wire it to the relays, that AREN'T LABELED!
A for effort. but it kinda falls short on the actual instructional point of view, and is fairly useless.

[e30work]

http://www.youtube.com/watch?v=H4UXrEPQMUg

watch how he starts the car

[e30work]

Why not just make a wiring diagram and use the factory harness?
Or would that make it too easy, you know, not having to wire it to the relays, that AREN'T LABELED!
A for effort. but it kinda falls short on the actual instructional point of view, and is fairly useless.

this is the diagram for the factory harness. relays are standard 4 and 5 pins.

[Stoner Sam23]

DONE!

http://www.youtube.com/watch?v=2VIvgSEzvew

[kronus]

Thanks for the schematic, this is helpful for wiring our lemons car.

[e30work]

updated: spoonfed