push button ignition help

[DJ W]

Hi i bought a ignition kit from demond tuning and was wondering if someone could help me i have everything wired up so when i push the button 12 v comes out of 87. My problem is that i cannot find the black and yellow wire out of my ignition. Out of my ignition are 8 wires 4 are bigger 18? gauge wire and the other 4 are small 20 gauge. the bigger wires are white, black, red, green/blk and green. The smaller wires are brown, brown/blue, brown /green, brown/ red. my problem is i cannot figure out which wire goes to my starter solenoid. i have tried probing with my fluke with bumping the ignition but no luck on finding 12v when bumped. i was wondering if anyone could give me some advice.

thanks

[1mz]

87 what? 318i? 325i? eta? Cabby?
http://wedophones.com/Manuals/BMW/

[IRON-E]

You can always PM Luke, (StereoInstaller) he knows his shit.

[DJ W]

sorry 87 on the relay i coppyed this out of the diy section since no one replyed and its just sitting in my car its on my 84 318i

thanks

[AndrewBird]

Should be a black/yellow wire. If there isn't one, not sure what to tell you. As a last resort, you could always just run a wire straight to the starter/solenoid.

[DJ W]

Should be a black/yellow wire. If there isn't one, not sure what to tell you. As a last resort, you could always just run a wire straight to the starter/solenoid.

there is a big black and yellow wire coming off of the starter solenoide but none inside :letitout: