No sound.

[aschmidt]

Hmm...I was listening to music like normal a while ago, and then turned off my volume. When I turned it back on the next day, there was no sound. Sorry if this sounds stupid (and it probably is), but I don't really know what to look for. I checked r3v, my bentley manual, and my deck manual (Clarion DXZ815MP)...but I can't figure out what to do. Any help would be much appreciated, thanks!

[jajou318]

Re: No sound.

Maybe one of your wires is grounding out. Pull out your headunit and make sure all connections are secured and covered.

[StereoInstaller1]

What are the components in your system? Who did the install?
Does your deck have "dual zone"?
Luke

[A_325i]

do you have it on mute?...is the fuse blown in your deck(if its aftermarket) is the fuse blown in your amp if you have one is the fuse blown in your 12v line going from the amp to the battery? ofcourse this is only if you have an aftermarket system...check the little things first

[permit]

Are all your speakers running off the built in amp? Two wires could have touched and blown out that amp. Thats what happened to me.

[aschmidt]

Maybe one of your wires is grounding out. Pull out your headunit and make sure all connections are secured and covered.

I'll check that out, thanks!

What are the components in your system? Who did the install?
Does your deck have "dual zone"?

Everything besides the deck is stock as far as I know. I don't know what dual zone is either...sorry.

do you have it on mute?...

Lol no, but thanks for mentioning it.

Are all your speakers running off the built in amp? Two wires could have touched and blown out that amp. Thats what happened to me.

I'll go check that out.