Turn signals Don't work

[01330i]

Hey guys, searched for this issue and found similar ones but mine seems to be a little different.

So my turn signals haven't worked for awhile now and it's driving me crazy.

My hazards work perfectly

High beams don't work when pushed fully on, but the temporary high beam flash works.

I just replaced the turn signal stalk thinking this was bad, but nothing changed.

Any help would be greatly appreciated!!

[XKXXKXe30]

Did u check the turn signal relay?

[01330i]

That's the black one on the steering column right? I took it out how do I check it?

[XKXXKXe30]

Yes. All the ones I have seen that where bad had like a black sut in between the prongs. U could always steal one from budget wrench apart & switch them to know for sure. Plus its always good to have an extra on hand. Almost the same exact thing happened to me & it was my relay so now I always take em when I find them. Don't ever wanna b n the middle of winter having to use my hand signals again, it sucks.

[iceman]

If you replaced the turn signal stock, it should have come with another Zeitgerät/relay.

There is another relay behind the steering column that looks like the one on the steering column and I don't know what it does, I wonder if it's related.

Check fuses: 4, 24

I'll dig around the wiring manual some more.

[iceman]

I think it still could be the switch for the hazards.

[01330i]

Ok so I changed the relay from one i found at pick n pull. Turn signals work now but my 4 side marker bulbs are broken so they were blinking fast. had to order them cause they are kinda rare now apparently.

[notguilty411]

I had the exact same problem, except out of nowhere my high beams started working normally again. Turn signals still do not. I replaced the flasher/relay under the steering column with a new one from Advanced. You guys said there is another relay somewhere??