Announcement

Collapse
No announcement yet.

6 button OBC Question and yes I searched

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

    6 button OBC Question and yes I searched

    Posted in the interior section and might as well try here since it is related with the car electronics.

    Hey guys,

    I searched through different boards and through this board but couldn't find anyone really relating with the same type of scenario.

    Story:

    My 6 button obc always had the matrix thing going on. It never bothered me as when I pressed on the center it would go away for about couple of minutes then do its thing.

    Well about a month ago I was driving and I just heard a "pop" and smelled something like burnt plastic come from the center console region. Figured it finally went and was time for a new one. Wrong.

    Right now this is what I'm experiencing:

    - Getting .9v from 2 pins from the green plug (can't really tell which pins they are) = Is this normal?
    - If the voltage output is low what could be causing this? (I heard of the obc relay causing people to stall but would a faulty obc relay cause the obc to not get power?

    It obviously makes sense if it isn't the obc, it has to be the relay. Just looking for conformation before I go ripping up the front of my car. Thanks guys.

    -Jasper

    SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

    #2
    Figured it out. Yellow harness for the obc behind the cluster "popped" off. Go figure it was something so retarded.

    SINdelle:E36 M3 5-Lug | 17x8 & 17x9 BBS RS | S52/ZF | 2.93LSD/3.5HFM/24lb Injectors/C&S Chip[B]SOLD[B]

    Comment

    Working...
    X